Keltec Sub2000 Baffle tool
Print Profile(1)
Description
The Keltec Sub2000 CQB is a great firearm. But if you fail to clean it regularly it will carbon up and you will find it very hard to remove the internal suppressor baffles. This tool locks on to the baffle lip and you can then work the baffle out. You might need to print several if the suppressor is really bad. Use lots of PB blaster to break up the carbon then use the tool. it works but if really bad will take some time.
The tool is 14" long so place at a angle on the print bed to fit. It has a flat side so it prints easy.
I use PLA with 70% infill and 4 walls for strength.
Prints easy on my H2D.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (1)