Ursus King Evo Bicycle Kickstand Foot

🚲 Bring your Ursus King kickstand back to life!

Has your Ursus King kickstand lost its plastic foot, or has it broken over time? Don't replace the entire kickstand! This replacement model is designed to fit perfectly and offer better stability than the original part.

Why print this part?

• 🛠️ Durable Repair: Specifically designed to replace the often fragile original part, thus extending the lifespan of your equipment.
• 💪 Increased Resistance: The use of TPU allows it to absorb shocks and resist repeated rubbing on asphalt without cracking.
• 🌍 Eco-friendly: Why buy a whole new kickstand when you can simply print the wear part? A saving for you and a gesture for the planet.

Compatibility

• ✅ Tested and validated on: Ursus King kickstand (standard model).
• ❓ Likely compatible with: Other models in the Ursus range with a similar rectangular/oval tip (check according to your dimensions).
• 🤝 Your help is valuable: If you install it on another variant, please post a photo and a comment to help other cyclists!

Printing Tips

• Recommended filament: TPU (preferably 95A) for its flexibility, shock resistance, and excellent grip on the ground.
• Not recommended filament: PLA, as it is too rigid, breaks under the weight of the bike, and slips on smooth surfaces.
• Infill: 40% to 50% (Gyroid) with at least 4 or 5 walls to ensure maximum structural strength under the weight of the bike.
• Mounting tip: If the foot is difficult to insert, do not hesitate to gently heat the part in hot water to soften the TPU before installation.