Wasp Nest Decoy - Wall mount

🐝 Wasp Nest Decoy (Wall Mount)

A realistic wasp nest decoy designed to help discourage wasps from settling near your home.

Wasps are highly territorial and tend to avoid areas where another colony is already established. By placing a visible “occupied” nest under eaves or roof overhangs, you can often prevent new nests from being built nearby.

This model is designed specifically for easy mounting and a clean, natural look once installed.

✦ Features

Realistic layered surface to mimic natural paper wasp nests
Flat back for flush wall mounting under eaves or overhangs
Flat top for clean contact against ceilings/roof structures
Integrated keyhole mounting slot 
Designed for standard screws (max head Ø10 mm)
Lightweight but solid structure

✦ Print Information

Model size: approx. 128 × 128 × 140 mm - (Can be scaled as your wish. )
Filament usage: ~193 g
Print time: ~5h 30m (0.4 mm nozzle, standard settings)
Material: PLA (tested in light gray)
Supports: Recommended but not strictly required
Orientation: Print as provided

✦ Mounting

Uses a keyhole slot for quick installation:

• Install screw in wall (leave head slightly proud)

• Slide model into place

   

⚠️ Note: If scaling the model down, the keyhole will also scale accordingly.

✦ Recommended Filaments

For best realism:

• Beige / light gray 🥈
• Slight color variation improves the effect

✦ Placement Tips

Mount under:

• roof overhangs
• eaves
• visible exterior corners

The silhouette and placement matter more than perfect color accuracy.

✦ Notes

This is a visual deterrent – results may vary depending on environment and wasp species.

No assembly required.
Model is optimized for straightforward printing and mounting.

✦ 

A simple print that might save you from an entire summer of unwanted buzzing tenants 😄

Happy printing! 🐝✨