Fireball Flame Presta Valve Cap

The **Fireball Flame Presta Valve Cap** turns your valve into a miniature fire sculpture. The entire cap is sculpted as a Fireball flame — a bold, three-tongue flame silhouette with a negative-space cutout through the center, threaded directly onto your Presta valve.

No logos on top of a plain cap. The cap **is** the flame.

The base threads on with just a couple of turns — quick on, quick off. The long unthreaded tube body extends down over the valve stem purely for looks, giving the flame real presence above the rim. As a bonus, if your Presta locknut ever works itself loose, the sleeve helps hold the stem in place so it doesn't drop into the rim.

Screw it on, spin your wheel, and every rotation puts fire on full display. Compatible with any standard Presta valve on road, gravel, MTB, or cyclocross setups. Designed and printed by **Fireball 3D** — part of the **Fireball Cycling** lineup.

---

## Features

- **Full flame silhouette body** — the entire cap is shaped as the Fireball 3-tongue flame with inner cutout

- **Threads on in just a couple of turns** — fast to install, no over-tightening needed

- **Long unthreaded tube body** — extends down over the valve stem for a bold, tall look

- **Stem retention bonus** — tube sleeve keeps the stem from dropping into the rim if the locknut loosens

- **M5 × 0.8 thread** — fits standard Presta valve tips

- **1.5–2mm wall thickness** for durability without bulk

- Compatible with road, gravel, MTB, and cyclocross valves

---

## Compatible With

- Any Presta-valve road, gravel, MTB, or cyclocross tube or tubeless valve

- Standard Presta valve tips (M5 × 0.8 thread)

---

## Versions
- 2026-05-29 - v1.1
.   - 2mm longer so not touching release valve end