Even Deeper Regrets — Insert & Card Holders

Even Deeper Regrets — Box Insert & Card Holders

A custom 3D-printed insert for the Even Deeper Regrets expansion to Regrets by Tettix Games. Designed to hold all expansion content — sleeved — within the original expansion box, with the rulebook sitting flat on top.

What's included

• Bottom tray (printed in two halves — joins inside the box, ~120 mm + ~142 mm = 262 mm total length, 105 mm wide)
• Lift-out card holder with three wells for the Depth I, Depth II, and Depth III sleeved decks (also fits Item Supply, River, or Loch in any well). Sits tight on top of the tray, held in place by tabs to prevent sliding
• Small-items strip at the foot of the tray for Bad Fish (Kickstarter exclusive), Ambulance, Nightcrawlers, and the Aquatic Life reference cards
• Bag pocket sized for the included drawstring token bag, which sits on top of the dinks / Even Deeper Regrets mini cards to pin them in place during transport

Designed for sleeved cards. Big cards measured at 66.76 × 91 mm sleeved; small ("dink") cards at 47 × 71 mm. If you play unsleeved you may notice some rattle — consider sleeving or adding a foam shim.

Fits in the original expansion box (107 × 263 × 66 mm interior). The full insert sits below the rulebook, which lays flat on top of everything with no flex.

Print bed requirements

• Bottom tray: two halves at ~120 × 105 mm and ~142 × 105 mm — fits any bed 150 mm or larger
• Card holder: prints as a single piece at ~209 × 97 mm — requires a bed of at least 220 mm in one axis
• Not compatible with 180 mm beds (Bambu A1 Mini, Prusa Mini, etc.) — the card holder cannot be split without losing structural rigidity

Print settings

• Material: PLA or PETG (PLA shown — teal matches the Tettix box interior)
• Layer height: 0.2 mm
• Outer walls: 1.6 mm (4 perimeters)
• Internal dividers: 1.2 mm (3 perimeters)
• Floor: 1.2 mm
• Infill: not required — walls are fully solid at these thicknesses
• Supports: none needed

Compatible with the Kickstarter version of the expansion. Retail version may have different small-card content — please check before printing if you backed retail.