Carnage in the City
Print Profile(1)
Description
Free for personal printing use only.
Exclusive projects and commercial license available at Patreon.com/StrataPrints — your support keeps new designs coming! Check out this other Carnage print below, available EXCLUSIVELY on Patreon!
Project: Carnage.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 189.76x235mm in size
You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 2.72mm
#131313 PLA Bambu Lab Basic Black Transmission Distance: 0.1
#6c6865 PLA BambuLab Basic Grey Transmission Distance: 0.1
#de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2
#ffffff PLA Bambu Lab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Basic Black
At layer #15 (1.28mm) swap to Grey
At layer #21 (1.76mm) swap to Scarlet Red
At layer #29 (2.4mm) swap to Matte Ivory White
This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.
Border Only Colors from here until the end.
At layer #38 (3.12mm) swap to Basic Black for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)