Search models, users, collections, and posts
Avionics Sled for Featherweight Avionics
IP Report
Print Profile(2)
0.2mm layer, 3 walls, 80% infill
Designer
52 min
1 plate
Mag Switch Option
Designer
55 min
1 plate
Open in Bambu Studio
Boost
2
9
1
1
20
10
Released
Description
This model is meant to be a sled for the Featherweight Altimeters Blue Raven, Power Perch, & GPS Tracker (links below) that can easily be removed from your rocket with all components still attached. It is designed to use the same hardware sizes as what ships with the Featherweight components and the wood “flap” is the one provided by the Power Perch kit.
I have been using PLA to print these and have yet to have any issues.
Items needed
- Featherweight Altimeters Raven Altimeter (Blue Raven shown in photos) https://www.featherweightaltimeters.com/blue-raven-altimeter.html
- Featherweight Altimeters Power Perch https://www.featherweightaltimeters.com/store/p5/Power_Perch.html
- Featherweight Altimeters GPS Tracker https://www.featherweightaltimeters.com/featherweight-gps-tracker.html
Potentially useful items
- #4 Washers https://www.mcmaster.com/catalog/98017A610
- #4-40 Screws https://www.mcmaster.com/catalog/91772A115
- #4-40 Nuts https://www.mcmaster.com/catalog/91841A005
- Nylon Spacers https://www.mcmaster.com/catalog/94639A200
Use is at the discretion of the downloader, I am not responsible for any damage or injury this model may cause.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)