Unfolded Texturable Dice - D4

Another Dice that has its faces unfolded for you to use a texture plate.

There is a No AMS and AMS option, but the No AMS option is a bit hard to read, so I would suggest painting the numbers.

Folding the faces by hand works most of the time, but i suggest using a flat surface to pre-bend the face so that they are evenly creased. Bending by hand may cause layer lines to flay out if they aren't properly adhered to the next layer.

For the clip, keep it at 100% infill and printed as inner/outer (by default) to that the hole dimension gets slightly smaller, ensuring a tighter fit and hold with the faces.

The assembled dice is made to be 16mm tall from surface to tip.