X2D Rear Cover V2 Complete
Print Profile(2)
Description
A cover for the complete rear inner wall of the X2D printer
Features:
- looks prettier and more individual :D
- gives the printer an even more premium look
- prevents accumulation of dust and filament residue
- covers open gaps and boreholes
- multiple design versions selectable in the print profile
Boost Me (for free)
Please leave a Boost if you like this part. This is really helpful to get noticed. And I would love to help you with more great content. Thank you!!
PETG would be recommended due to the chamber temperatures.
PLA also works acceptably. However, over a longer period, the component may warp slightly.
I used PLA CF here.
Assembly: (Please refer to the illustrated assembly instructions)
The cover generally consists of three parts.
Preparation:
Assemble and glue the three components together.
Optionally, 3x magnets (Ø5x2mm) can be glued in at the bottom rear.
Additionally, I recommend applying fabric adhesive tape to the bottom surface. This prevents noise and helps with tolerance compensation.
Installation:
When installing in the printer, carefully place it and simply push it backwards against the wall.
There are small locking ribs at the top. Therefore, proceed with careful force there. 😉
Normally, the cover should then already sit firmly and no longer wobble.
Optionally, you can insert the fixing plugs through the two openings in the sheet metal strut at the top.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (46)