Image To Model - PNG to STL/3MF

Upload an image and generate a 3D model from it!

I have seen many people looking for a way to simply turn an image, a logo or such, into a 3D model. This generator does just that. 

Due to limitations in SCAD and the Parametric Model Maker, the generator is limited to 8 colors. 

Image MUST be 250px X 250px PNG

Use any free online image resizer like this one https://imageresizer.com/

1. Resize your PNG
2. Tap or click Customize on Mmodel page
3. Select model USE THIS
4. Upload your resized PNG
5. Tap or click Generate at bottom left
6. Scale your image to scale generated model
7. Select model thickness
8. Toggle colors off to, for example, remove background to not get a backplate on logo
9. Change colors if desired
10. Click or tap Generate
11. Download STL or 3MF of your model!

* The way SCAD reads an image does not result in proper coloring, you get a model which is divided by color along a gradient. This model can then be properly colored in slicer. Limitations in SCAD, the image can not be properly centered in the Parametric Model Maker UI, there are inputs to manually adjust positioning. Toggling the show toggles will make one entire color not render, the background color can be removed from the model for example.

** There are 2 experimental customizations as well, one 12 colors and one 16 colors. The 12 color will allow color selection, like the 8 color does, but some images are too computationally intensive for the Parametric Model Maker and will timeout the Makerworld server. The 16 color does not allow changing colors, all painting has to be done in slicer. Use with care