18650/21700 Charger-v2
Print Profile(1)
Description
This is an 18650/21700 charger using a TP4056 charging board. You need to prepare the charging board and battery contacts.
When assembling, after soldering the wires between the charging board and the battery contacts, insert the charging board into the slot of the casing, and then install the battery holder into the casing, without any additional hardware parts.
Because the edges of the casing and lid are relatively thin, it is recommended to print with PETG filament for higher strength.
If using transparent filament to print the casing, it is recommended to use a model without openings, as the charging board indicator light can show through the casing; if using dark colored filament, you can choose a model with openings.
This version includes a lid; if you find the lid unnecessary, you can try this more compact model without a lid:
https://makerworld.com.cn/en/models/2390157-18650-21700-chong-dian-qi#profileId-2715135
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)