Breek Arms Mod2 Extended Latch
Print Profile(2)
Description
This is an extension designed to increase the surface area of the Breek Arms Mod 2 ambi charging handle.
The extended latch allows a full two-finger grip per side. This makes manipulation easier, especially with gloves, during rapid operation, or when you need more leverage.
There are 3 versions included:
- M2 version - use four 8-10mm long M2 screws and nuts.
- M3 version - use 2 8-10mm long M3 screws and nuts.
- Friction fit only version - best looking, but least secure. Epoxy/glue recommended.
M2 and M3 version have held up to abuse at the range. The friction fit ones shook themselves off from recoil, but could be fine with a bit of epoxy.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)