Zinc .50 - Foam Dart Pistol Display Stand

Zinc .50 Display Stand

This is a simple display stand for all possible combinations of the Zinc .50 dart blaster. It keeps the blaster locked in place using the mag release while also not stressing the mag release spring. Its also able to store 2-4 magazines depending on your barrel options. Optionally, you can fit a larger barrel blaster on a smaller barrel stand. There will be some overhang if you choose to do this. You may want to do this if your buildplate is not big enough to print the 205mm display stand. 

Print Details

• When selecting which display stand to print, choose the print profile that matches the vertical column of the image above. 
• Stand P2 print profile has 2 models, the name badge and the mag stand mount. The mag stand mount must be printed for every variation of the display stand.

• The mag stand mount should be printed on its side to allow for smooth insertion. 
   

  

Assembly

• The mag stand mount requires 2 m3 x 9mm button screws.
• The optional name badge requires 2 m3 x 10-20mm button screws.