Fungi Friends 2 – “I’m Melting” - Free 3D Print Model

Search models, users, collections, and posts

Codebrain Forge

Art>Sculptures

IP Report

Print Profile(1)

All

A1 mini

H2C

H2D Pro

X2D

H2D

P1P

P2S

H2S

X1 Carbon

X1E

P1S

A2L

0.12mm layer, 2 walls, 8% infill

Designer

4.3 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Boost Me (for free)

If you enjoy this model, a boost would mean a lot and really helps support future creations. Every boost makes a difference and helps this model reach more makers. Thanks for checking it out and being part of the community!

Fungi Friends, represent a journey through time and space in phases.

Alright… things are starting to shift. The form softens, the edges drip, and suddenly gravity feels more like a suggestion than a rule.

This one is all about those flowing details—the drooping cap, the stretched textures, and the slightly off-kilter posture. It prints beautifully with those smooth overhangs and organic curves, giving you that “melting” effect without being a nightmare to print.

Definitely where things start getting interesting.

All Model Print images are 100% real no AI !!!!! What you see, is what you print!

Please Post images of your prints!!!!!!!!

Check out my profile for more super duper awesome models

Boost Me (for free)

Comment & Rating (5)

@Gandee6585

Print Profile

0.12mm layer, 2 walls, 8% infill

I scaled down from 185% (which it was at in my bambu studio when i opened the file) to 150% and changed layer height to 008mm. Printed very nicely in about 4 hours in PLA basic grey. One of the drips came off when removing supports, so I'll glue it back, and one drip at the back of the model seems to have struggled for some reason. A little sanding/tidying probably required before painting. But overall, great model - thanks a lot!

(Edited)

The profile uploader has replied

@machinegunkelly

Looks real smooth in that filament thank you for the thoughtful review, and kind rating!

@user_47566639

hello :) i have tried twice on A1 and both times the start of the brim came off, apx half way the print. then spaghetti creator, due to printing in the mid air. could you advise? thank you ever so much!

The designer has replied

@machinegunkelly

Hey there. I try to make all my models with "easy off" supports. This can be a double edged sword in some cases. Under the support settings, decreasing 'Top Z Distance' may help but will make supports harder to pull off, so you'll need to take greater care than normal. Match it to the layer height. ( 0.12mm )

@user_47566639

thank you :)

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.