Line follower fixation if screw thread stripped
Print Profile(1)
Description
The screw threads of the chassis used to fix the line follower sensor and the front castor wheel were forced, and the hole was visibly enlarged.
This part clips onto the lower part of the chassis.
It can be used in two ways
- Hexagonal holes directly under the sensor. In this case, the screw will fix into the circular hole on the other side.
- Circular holes directly under the sensor. In this case, one nut must be housed in each of the hexagonal holes (they fit easily when heated).
In both cases, it is necessary to use a screw larger than the original screw (an M4 14mm screw is sufficient).
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)