Lagoona Blue HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.32mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #7ebab5 PLA+ Numakers Teal Blue  Transmission Distance: 2
    #cd007b PLA BambuLab Basic Magenta  Transmission Distance: 3
    #ffffff PLA+ Sunlu White  Transmission Distance: 5
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #56b7e6 PLA BambuLab Matte Sky Blue  Transmission Distance: 1.3
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Teal Blue /swap Sky blu in
    At layer #14 (1.2mm) swap to Magenta / swap yellow in
    At layer #17 (1.44mm) swap to White
    At layer #19 (1.6mm) swap to Yellow
    At layer #22 (1.84mm) swap to Sky Blue
    At layer #24 (2mm) swap to White for the rest.