Print Profile(2)
Bill of Materials
Description
A decorative pendant lampshade with a soft bell-shaped silhouette and flowing vertical wave lines. Designed for Vase Mode printing and warm ambient lighting.
The lampshade is printed in Vase Mode, creating a lightweight single-wall structure with a clean and refined finish.
A matching top mount is designed for this model and fits into the upper opening of the shade. I recommend securing the mount with a few drops of super glue for a reliable fit. The lamp holder is inserted through the mount and connects to the socket housing.
Print Settings
lamp: VaseMode , 0.14mm layer || Mount:0.2mm layer ,15% infill
Assembly Instructions
- Print the lampshade in Vase Mode.
- Print the matching mount separately.
- Insert the mount into the top opening of the lampshade.
- Secure it with a few drops of super glue.
- Insert the lamp holder through the mount.
- Connect it to the socket housing.
- Use an LED bulb only.
Important Safety Note
Use LED bulbs only.
Do not use incandescent, halogen, or other high-heat bulbs. Make sure the bulb does not touch the printed shade or the mount, and always ensure the lamp hardware is installed safely.
Boost Me (for free)
If you like this design, a Boost would be greatly appreciated.
Your support helps me continue creating and sharing new decorative lampshade models. Thank you.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)