Tiny, TOUGH, Sensory Star w/ Handle (Keychain)

Join Patreon as a free member to catch new releases & free-to-sell models.

Prowl with 1k+ foxes & ~300 authorized sellers in our Skulk!! 🦊

Friendly Reminder: An active commercial license is required to sell prints of my non free-to-sell models.
>> (My partner and I offer many models you can sell for free!) <<

I'm an ADHD husband, father of 5, QA engineer, market vendor, & self-taught designer.

Thank you for backing my family of 7 & honoring the thousands of hours I've poured into this! 🖤

---

Those of you who know by now I have a hard time doing any of this with less than 108% effort. haha

Notes:

• My favorite is definitely the stick + loop
  • (The stick has some little ridges/texture!)
• Options: 
  • Stick + loop
  • Stick only
  • Loop on top (no stick)
  • Loop on side (no stick)
• My settings are PURPOSEFUL
  • We are looking to MAXIMIZE strength for something this small
  • SURE we could print faster & thinner, but you'll get a more fragile result
• IF you download the .stl (and not a .3mf from a profile) you will NOT get my settings 🤷

Some of the filament settings (with ANY form of PLA, in mind):

Perfect size/model thickness for 0.48mm walls (increasing strength, over 0.42mm walls)

• Keep in mind, the more you have on a plate the faster you can print & increase fan speeds (since more time inbetween layers will allow for some better inter-layer adhesion)

---
If you like & want to support my work, you can always..

• ⚠️ May have sharp or pointed features that could cause discomfort or injury if handled carelessly
• 🧩 May contain small parts and present a choking hazard
• 👶 Not for children under 3 years of age
• 🧠 Recommended for mature users
• 🤕 ToddysTrinkets is not responsible for injuries resulting from use
• 🛑 Use at your own risk