N & HO scale Greenhouse
Print Profile(2)
Description
Notes:
- A small amount of glue may be required, especially for the door.
- Scaling or changing the layer heights can cause issues. (print at 0.2mm layers)
- Clear PLA is used for the glass
- Designed for use with an AMS
Assembly:
- Glue the door into place
- Bend the sides into a rectangle
- Work the sides into the base
- Bend and install the roof
Be sure to bend the sides in the correct direction. The glass (smooth side) will go on the outside. When bending parts, it's possible that you could crack one layer, but in most cases this should not be an issue. Each bend is designed with 2 layers, and should still hold if one cracks. If you wanted to glue the model together, you can also ditch the base, if you'd prefer that look.
The sides should be a semi-snug fit into the base, and may take a little working to install. I believe it should work for most, but different printers/filaments/settings can sometimes throw things off. If you find that the base is really too small, the best option is to scale the base slightly larger (maybe 102%).
I have a few other models N and HO scale models uploaded, and plan to add more. Any support/follows is greatly appreciated!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)