Wavy Paper Bag Bed & Table Lamp E27

Wavy Paper Bag Bed & Table Lamp E27

Transform your space with an elegantly designed, sculptural table lamp with fluid organic wavy lines. This decorative lamp is a statement piece for any modern interior, casting a soft, mesmerizing, and warm light. Perfect for setting a cozy mood on a table or in the bedroom.

Features:

• Organic Wavy Design: A stunning surface that diffuses light into a soft, even glow, highlighting the complex curves.
• Print Support-Free: The entire model is designed to print flawlessly from build plate to top with zero supports.
• Two-Part Construction: The lamp is composed of two separate pieces (base and shade)

Dimensions (with shade attached):

• Total Height: 32 cm
• Maximum Width: 18 cm

Hardware Requirements:

This lamp is designed for a standard E27 (27mm screw-thread) lamp holder with a screw-socket. Make sure to use a low-wattage LED bulb (as shown in the example photo) to prevent heat buildup, as LED bulbs generate very little heat.

Print Settings:

• Material: Matte White, Bone, or a light translucent color (PLA, Matte PLA, or PETG) for the softest, most even light diffusion.
• Layer Height: 0.16mm or 0.2mm for a balanced finish. 0.12mm for an ultra-smooth finish.
• Walls: 2-3 walls.
• Infill: 5-10% for the base, 0% Spiral vase mode for the shade with 0,8mm layerwidth.

Check out my profile on Patreon: https://patreon.com/CrizzyDesigns

Don´t forget to check out my collections: https://makerworld.com/en/@CrizzyDesigns/collections