Dartboard Lamp Extension
Print Profile(1)
Description
🎯 Dartboard Lighting Extension (Action Eurodomest Model)
Enhance your gaming comfort with pro-level lighting for less than €5!
This project is an extension specifically designed to adapt the Eurodomest screen light bar (sold at Action) to a dart setup. It allows the light source to be extended forward, thereby eliminating shadows cast by the darts and perfectly illuminating each segment of the dartboard.
✨ Why choose this model?
- Ultra Economical : Uses the cheapest lamp on the market (Action ~€4.99).
- Robust Fastening : Model designed to be screwed for maximum stability, even during impact vibrations.
- Custom-fit : Precisely designed for the diameter of the Eurodomest bar (30 cm).
- Visual Comfort : Eliminates shadow areas for better shooting accuracy.
- Versatile : Enjoy the lamp's 3 color temperature modes (Cool White, Warm, or Natural).
📦 Required Materials
- The lamp : Eurodomest screen light bar (Ref. 3202689).
- Direct link : Action Light Bar
- Screws : [Specify screw type here, e.g.: 3.5mm wood screws] for fastening.
- Power supply : Standard USB-A port.
🖨️ Recommended Print Settings
- Material : PLA or PETG (Black preferably to avoid reflections).
- Supports : ✅ ENABLE SUPPORTS. (Required for overhangs and screw holes).
- Infill : 20% for good strength when screwing.
- Walls : 3 layers minimum.
🔧 Assembly Instructions
- Print the part, making sure to enable supports in your slicer.
- Carefully remove the supports after printing.
- Insert the light bar into the designated holder.
- Screw the extension securely onto your mounting surface (wall, furniture, or protective panel).
- Plug in and play!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)