Dark vs Light–Horse Sculpture -LED Tealight Holder

A striking fusion of light and darkness. This dual horse sculpture represents balance, contrast, and connection. Designed with flowing, layered forms, it creates a powerful visual from every angle—especially when paired together.

The white form is optimized as a LED tealight holder, casting a warm glow through the open structure, while the darker counterpart adds depth and contrast as a solid sculptural piece.

*Only intended for LED lights.

For more modern minimalistic home decor, go here: https://makerworld.com/en/collections/21918876-modern-home-decor

Printing:

1. Designed as two pieces to be able to print with different colors. 
2. Use a clean print plate with some glue (unless you are using a super tack plate)
3. Use dried out filament.
4. Support is needed - Please keep the positioning and the support settings as is as the settings have been adjusted to minimize scaring.
   1. Please verify the support settings is still set on:
      1. Style-Tree Organic, 
      2. Threshold angle 30, 
      3. On build plate only  

Support Removal:

• Let the model cool down before removing the supports.
• Use pliers when removing the supports.
• Start with breaking the support in the middle with a gentle twist to the side using a plier.
• On the White Horse - Break/ Loosen the support on the inside before removing the support on the outside.
  • On the White Horse, be careful with the ribbons (mane) on the top when removing the support. 
• Light sanding and gentle heating might be needed. Different filaments impact this as well.

If you like this design, please leave a rating, a comment or a boost.