Cinderella Brigadeiro Ejector

👸 Brigadeiro Ejector Kit - Cinderella Theme

Transform your sweets into true works of art! This kit was specially developed for confectioners looking to elevate their brigadeiros and gourmet sweets. The design features precise details to create clear and elegant markings.

✨ What's included in the kit:

• Ball Gown: With soft creases for a classic finish.
• Enchanted Castle: Tower and heart details.
• Pumpkin Carriage: A touch of magic with detailed wheels.
• Princess: A delicate face to charm customers.

🛠️ Recommended Print Settings:

• Material: I strongly recommend using PETG or PLA Food Safe. PETG is ideal for its greater thermal resistance and durability.
• Layer Height: 0.12mm or 0.16mm (to ensure the ejector details are well defined).
• Walls (Wall Loops): 3 or more to ensure the part is robust when pressing the sweet.
• Infill: 15% to 20% (Grid or Gyroid).
• Supports: Not needed if your printer is well calibrated for bridging.

🧼 Hygiene and Care:

1. Wash before use: Use warm water and mild soap.
2. Avoid Excessive Heat: Do not put in the dishwasher, as high temperatures can deform the plastic (especially if it is PLA).
3. Post-processing: Make sure to remove any "stringing" from the print to ensure food safety.

💡 Golden Tip: For a perfect result with brigadeiro, use a little release agent or water on the molds before stamping them.

If you liked this model, don't forget to give it a Like and post a photo of your sweets! This helps my work a lot.

• Leave your like
• Follow my profile;
 

Here are some of my other models:

https://makerworld.com/en/@Dimasst