Search models, users, collections, and posts
The Good The Bad and The Ugly
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.7 h
1 plate
Open in Bambu Studio
Boost
1
5
0
0
1
0
Released
Description
Project: The Good
HueForge by Big O
A striking, high-contrast HueForge portrait from the legendary “The Good, the Bad and the Ugly” theme. Rich warm tones with deep shadows and dramatic lighting — perfect for Western / cinematic wall art.
Print Settings:
- Size: 200 × 200 mm
- Infill: 100%
- Layer Height: 0.08 mm
- Base Layer Height: 0.16 mm
- Base Thickness: 0.96 mm
- Max Thickness: 2.96 mm (Actual: 2.48 mm)
You may use higher layer heights below the base thickness of 0.96 mm.
Recommended Filaments:
| Color | Hex Code | Filament | Transmission Distance |
|---|---|---|---|
| Black | #000000 | Bambu Lab Basic Black | 0.6 |
| Red | #c00d1e | Bambu Lab Basic Red | 4 |
| Orange | #c97310 | Elegoo Orange | 5.2 |
| Yellow | #ffe800 | Panchroma Yellow | 4.2 |
| Beige | #e7ceb5 | Bambu Lab Basic Beige | 8 |
| Bone White | #ffffff | Sunlu Bone White | 1.5 |
Important Notes:
- This print uses 6 unique filaments.
- Stick to the exact filaments and transmission distances above for the intended look.
- Deviating from these settings will change the final appearance — sometimes dramatically, sometimes with surprisingly cool results. Good luck and happy printing!
Designed for Bambu Lab printers using the HueForge technique for maximum color depth.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)