Avatar The Last Airbender : Wanted Poster

This "Missing Appa" poster is a nostalgic trip straight to the streets of Ba Sing Se! Brought to life through the magic of filament painting, this 3D-printed tribute captures everyone’s favorite sky bison in stunning detail.

PRINTING SETTINGS IMPORTANT!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.97713mm

Filaments Used:
    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #55331a PLA BambuLab Brown  Transmission Distance: 0.8
    #e7ceb5 PLA BambuLab Basic Beige  Transmission Distance: 8
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #8 (0.72mm) swap to Brown
    At layer #16 (1.36mm) swap to Beige
    At layer #20 (1.68mm) swap to Ivory White for the rest.