Max Flow & Speed Stress Test (150-500 mm/s)

🚀 Ultimate Max Flow & Speed Stress Test (150-500 mm/s)

Stop guessing your printing limits! This calibration tool is designed to find the exact "breaking point" of your filament and extruder setup. Whether you are using a stock Bambu Lab P1S/X1C or a custom high-flow nozzle, this test will show you the truth.

📊 What this test reveals:

• 150 mm/s: Reference quality. How your filament should look at standard speeds.
• 250 mm/s: Modern high-speed standard. Checks for minor surface artifacts.
• 350 mm/s: The "Flow Wall". Most standard PLAs start to lose gloss and strength here.
• 500 mm/s: Extreme test! Can your hotend keep up? Watch for under-extrusion and "fuzzy" numbers on top.

🛠️ How to use:

1. Download the .3mf file (pre-configured for different speeds per object).
2. Use your favorite filament (works best with PLA or PETG).
3. Inspect the embossed numbers on top – they are the first to deform when the flow is too high.
4. Check the side walls for consistency and "matte" spots.