MX-5 Miata ND Air Scoop
Print Profile(0)
Description
Originally posted in Thingverse. Here I included the Fusion file. Also, the file can be modified and simplified to fit in a 300x300 printer
-----
.2 layer
3 outlines
15-20% infill
I used #6 ½ in SS recessed head screws to put it together. I don't remember the nut and screw size for the clamp, but if you take the parts to a hardware store, it will be easy to figure out.
It will require sanding and using epoxy to smooth and fill any gaps. I painted it with automotive spray paint.
Update: I added two are diffuser/redirectors. These help push the air to each side and towards the body instead of straight down. It is about 12 degrees to each side and 30 degrees toward the person. These are optional.
Knob bolt h and nut: ¼ in hex bolt with matching nut. I think a 6mm bolt will th work too
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)