Print Profile(1)
Description
Practical hanging holder for the kitchen, which can be attached directly to a drawer or cabinet front. Ideal as a small collection container when cooking, for example for vegetable peels, packaging waste, coffee filters, or other kitchen waste.
The system consists of a holder frame and, depending on use, a suitable insert. This allows the container to be positioned directly under the worktop so that waste can be conveniently pushed in from the work surface or cutting board. Very practical when preparing vegetables, fruits, or other ingredients.
The design is particularly useful in small kitchens as it creates additional storage space without permanently occupying space on the work surface.
Features
- Easy to hang on a drawer or cabinet front
- Ideal as a kitchen waste collector when cooking
- Perfect for vegetable peels, packaging, and small kitchen scraps
- Space-saving solution directly under the worktop
- Quick to remove and easy to clean
- Practical for small kitchens and limited work surface
- Depending on the version, with insert container or throw-in/slide-in surface
Notes
Please check the thickness of the front or the available hanging depth before printing. Depending on the kitchen, it may be useful to slightly adjust the model in the slicer.
For use in the kitchen, PLA generally works, but PETG is often the more robust and practical choice, especially if the container is used or cleaned frequently.
As always, load capacity depends on material, wall thickness, infill, and print orientation. This model is intended for normal kitchen waste, not for very heavy loads.
Printing Recommendations
- Material: PETG recommended
- Alternatively: PLA or PLA+
- Layer height: 0.2 mm
- Wall lines: 3–4
- Infill: approx. 20–35 %
- Supports: usually few or none needed depending on orientation
- Print the holder a bit more stable
Possible Uses
- Collection container for kitchen waste
- Helper for cutting vegetables and fruit
- Container for packaging waste
- Small organizer for kitchen or household
- Removable insert for quick emptying
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)