Incendiary Crusher - SG225IE - HellDivers 2
Print Profile(1)
Description
Helldivers 🙌,
The hour is grave! Our peace regime has been severely disrupted since the appearance of the Terminids.
You absolutely must equip yourselves with weapons boasting military power worthy of our legion.
⚠️ Highly recommended to print this replica of the SG-225IE incendiary shotgun to ignite the Terminid nests.
This version aims to spread "Democracy" from our beloved game "Helldivers 2".
Unlocked: Page 2 of the Steeled Veterans premium Warbond.
Total cost: 120 medals (60 medals for page 2 and 60 for the weapon)
Breaker Incendiary (Incendiary Breaker) version with a length of approximately 750 mm. A "must-have"!
❗Warning: I recommend using this replica with caution.
=> It is non-functional, but visually constitutes a weapon and could harm others.
Use PLA Matte/PLA Basic, that's what I personally used.
Can be printed with predefined colors in the print profile, or single-color for painting enthusiasts (great for details).
I'm publishing a single-color print profile with plate separation according to part colors ;)
Required tools/supplies:
- super glue
- Sandpaper (fine grit)
- Red electrical wire / plastic lacing (Lol)
Assembly tips:
- The inserts to be placed between each part may have dimensions that vary depending on your printer settings; sanding may be necessary in these areas so that they can fit and be glued more easily.
- Each part may have varying dimensions on the joint surfaces depending on your printer settings; again, light sanding can help improve the finish.
- A dry fit before and after painting is preferable before opening the glue tube :)
- Assembly of the bullet magazine to be done separately
- Painting the parts before gluing, this can be more practical
- Gluing all parts with super glue or model glue :D
- Gluing the red wires for a final look faithful to the original version
Share your results, customizations, and colors, give lots of likes, and have fun :D !!!!
22/05/26 - Upgrade:
Revision 2 published to correct an interference between the CROSS_BASE and the BUTTSTOCK_PAD.
Thank you for your help and feedback, dear Helldivers.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (6)