Room Basketball Hoop
Print Profile(1)
Description
Room basketball hoop with a hook to hang it on the door.
Assembly printed exclusively WITHOUT AMS.
Printed in various pieces that are assembled together with common M6 screws:
-hoop with backboard with 3 M6 screws 12mm long;
-door hook to the backboard with 2 M6 screws 16mm long
Print 8 linked chains, the open chain link should be inserted into the hoop ring;
Print 24 closed single chain links, to be placed around to tighten the diameter of the chains, assembled by making a cut and interlocking them 2 at a time to make the larger diameter in the 3rd link from the top, using the first 16 of them; for the smaller diameter, use only 1 link with the same procedure for the final hoop link, using the last 8 remaining.
See the photos for any clarifications, but it is very simple to assemble!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)