MagClick - The Magnet Powered Clicker - Free 3D Print Model

Search models, users, collections, and posts

YosaNatural

Toys & Games>Other Toys & Games

IP Report

GIF

Print Profile(6)

All

A1 mini

H2C

H2D Pro

P2S

P1S

X1 Carbon

P1P

H2D

H2S

X2D

X1E

A2L

Two colors, Optimized settings (4x2 mm magnets)

Designer

1.3 h

2 plates

4.9(16)

XL Size (6x3 mm magnets)

Designer

2.5 h

1 plate

4.9(15)

Single color, Optimized settings (4x2 mm magnets)

Designer

1.2 h

1 plate

4.8(9)

Two color Print by Object - XL size (6x3 mm magnets)

3.7 h

1 plate

5.0(1)

Click to see more

Open in Bambu Studio

Boost

1268

3039

172

1.3 k

929

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Round Magnet

Bambu Filaments

Select all

Matte Apple Green (11502) / Refill / 1kg

Description

MagClick - The Magnet Powered Fidget Clicker

Sharp, Satisfying, Magnetic – A next-level clicker

Magnets:

You will need 20 round 4×2 mm magnets, or 6×3 mm magnets for the XL size. I recommend using magnets from the Bambu Lab store because they are really high quality and work very well for this. If you purchase them through the Bill of Materials, the cost is the same, and you support me in the process.

Make sure to use strong neodymium magnets!

Assembly:

Magnet order:

I recommend using a small amount of superglue when attaching the magnets.

Use the picture below to arrange the magnets correctly. The north and south sides don’t matter, only their orientation relative to each other.

To make assembling easier, press and twist the pins in place at a slight angle like you see in the video!

Boost Me (for free)

Consider leaving a boost to support my hobby :)

Check out my other Fidget Clickers!
PentaClick - The Ultimate Rubber Band Clicker PentaSpin - The Spinning Fidget Clicker

If you want to sell my designs, I offer commercial licenses in https://www.patreon.com/YosaNatural

Comment & Rating (172)

@Ch0ppedCheese

Pinned by Designer

But you use your fingers to power the thingy.... 🤫🧏💪

The designer has replied

@YosaNatural

I mean you're not wrong😂

@froggything11

and technically the printer and filament...😬

@Ch0ppedCheese

Replying to @froggything11 :

Water and food for your fingers too👆

@adomas

Hi. i really need you to see this. your model pentaclick has a ugly copy. its called a tech zuble. when i tried to call him out for that, he just arrogantly said something about car brands copying each other and banned me from replying again. I think you should take down this model or the user himself

The designer has replied

@YosaNatural

Hi! I’m aware of “Zuble,” and while the concept is similar, the design is completely different. I appreciate your concern.

@adomas

Replying to @YosaNatural :

oh really? could you please explain the differences a bit, because when i look at them i just see a pentaclick but a square

@YosaNatural

Replying to @adomas :

The idea is the same, but the design itself is different. The geometry, proportions, and internal structure are not the same. The concept isn’t owned by anyone, and anyone can create a fidget clicker as long as the design is original.

@I1am1groot

are u a magnet cause am attracted by you

@3dguy9

REALLY?! YEAAA

@I1am1groot

Replying to @3dguy9 :

no no no just a daily rizz line

@user_1978707894

Holy shit that’s a lot of rizz

@janthielemann

unfortunelty the XL version with 6x3 magnets doesn’t work. the magnets are not strong enough to push it back out.

The designer has replied

@YosaNatural

Are the joints fully worked in and loose? Where are your magnets from? If the magnets are high quality N35 magnets (for example from bambulab), and the joints are loose, the force should be enough.

@janthielemann

Replying to @YosaNatural :

Yeah, all fully loose. The distance the center magnets can lift it is about 1.5cm but it doesn't manage to fully open it. The magnets are 6x3mm magnets from Amazon (I think from a chinese supplier so most likely not the highest quality) but bambos magnets are only n35 as well, no? I'll try to get my hands on some n52 or I'll try the rubber band version. I still like the idea behind it really much so thanks for it. :)

@YosaNatural

Replying to @janthielemann :

Yes, the 6x3 Bambulab magnets are N35, while the 4x2 mm magnets are N50M. I’ve only tested with Bambulab magnets, and they work very well. For me in the XL version the center magnets push to about 2 cm, and the side magnets easily snap it closed from there. Thank you for the feedback!😄

@MrsVlamingo

Boosted

Love it!!

@user_673506198

nice

@sxlvn

I printed the triangular parts vertically for a smooth top surface

The designer has replied

@YosaNatural

That’s a great idea! I never thought of that. I’ll have to try it too😄

@Primeforge3d

I think mine is deformed

@user_4187594224

Print Profile

XL Size (6x3 mm magnets)

Strength Issue:the interlocking parts for model XL are not strong enough. they get broken during matting. unfortunatelly I have to print one wing again...

The profile uploader has replied

@YosaNatural

You need to be careful with assembly! If you use brittle material, you can add a wall layer!

@user_966040512

non magnetic one? like one that uses rubber bands

The designer has replied

@YosaNatural

Check out PentaClick😁!

@oopiegoogie

Replying to @YosaNatural :

can you make a version of magclick with some bearings 3 d printed? that would be really cool

@user_673506198

Replying to @oopiegoogie :

he did

@Biscuits3D

Print Profile

Two colors, Optimized settings (4x2 mm magnets)

GIF

@user_2282693984

Hey I'm just the first comment

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Keyboard clicker fidget

CHB 3D PRINTING

16.4 k

2.8 k

Keyboard clicker Fidget

3DCrafts

33 k

7.6 k

Fidget clicker

shadow

27.2 k

3.8 k

Magnetic Keyboard Clicker

🫠

1.9 k

1.2 k