cover

Screenshot 2026-04-27 115555.png

IMG_20260427_121432.jpg

IMG_20260427_115857.jpg

IMG_20260427_115903.jpg

IMG_20260427_115909.jpg

IMG_20260427_121207.jpg

plate_1.png

49bdfb6c0aed16bb.webp

8211b433debda550.webp

3e480f45b2f2f0d6.webp

54557cceeb422fe1.webp

<ul><li>0.08mm layer height</li><li>Print with support</li><li>Improved strength by wall×4</li><li>Infill density 15%.&#34;</li></ul>

0.08mm layer, 4 walls, 15% infill

<ul><li>0.08mm layer height</li><li>Print with support</li><li>Colorized with RED</li><li>Improved strength by wall×4</li><li>Infill density 15%.</li></ul>

Lo que mejor me funciono a mi para que salga bien: Impresión con soportes dentro de la pieza y luego solo se destraba el mecanismo. (simplemente girando la parte superior)

What worked best for me for a good result: Print with supports inside the part, and then the mechanism simply unlocks (by turning the top section)

Print Profile(2)

Bill of Materials

Description

Comment & Rating (0)

License

Related Models

CAR / Toyota Hilux floor mats holder