KMM Handheld Car Vacuum Cleaner & Tool Holder

Buy me a coffee? https://buymeacoffee.com/practical3dp 
This mount is designed for this vacuum: https://amzn.to/4pYuimy (Amazon affiliate link)
3/4" screws work great for this mount, I used these screws: https://amzn.to/3Omt2vP
9" Crevice Tool For This Vacuum: Click Here
Vacuum Holder Only: Click Here

I created a mount to hold both the KMM Vacuum Cleaner and its tools! I included a version with and without screw holes so you can either use screws, or double-sided tape. I also included a version to use with MultiBuild/MultiBoard and a version that holds just the tools. 

After testing the sizes for each of the tools, I settled on a sightly loose fit to make removing and placing the tools easier.

COMING IN THE FUTURE: A better crevice tool that works with the brush, an extension tool for use with the crevice and blue tool, and their respective holders

VERSIONS:

I included different versions of the holder with PETG and PLA profiles. I created multiple versions with different attachment mechanisms. If you need a version created with a different attachment system on the back of the holder, send me a message and I'd be glad to do that for you :)

Print the holder in PLA or PETG, whichever filament you'd prefer. Feel free to leave a comment and offer any feedback or requests!

PRINT INSTRUCTIONS:

Filament: PETG or PLA
Layer height: .12-.2 (.16 recommended, I used lots of fillets and the part will look much better with .16 vs .2) 
Infill: 10-15% gyroid infill
Walls: 2-3
Supports: None

LICENSING: Makerworld Exclusive License - You may not use this design or file for commercial purposes.