Rudo Surebrec - Gachiakuta Red Neck Ring
Print Profile(1)
Description
My daughter wanted to cosplay as this character, so hopefully you wont ask me to prove i know anything about this guy :)
The small red button holds the two rings together, you will need 4 magnets to secure the grey collar, and may require some minor clearance scraping to make sure the magnet fits in all the way. As usual, check magnet polarity prior to installing into the magnet cup, you will not be able to retrieve them after.
Magnets were .118 thick and .314 diameter.
.314 is roughly 5/16" or 7.97mm
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (2)