Personalizable Keychain

-------------- EN --------------

Personalizable Keychain — Dual-Color AMS

Print a name keychain in minutes. Type a name, choose a font, adjust the size — that's it. Designed for AMS/dual extrusion printers for a clean two-color result directly off the build plate, without painting or post-processing.

What you can customize:

• Text (name, word, whatever you want)
• Font — over 50 choices from classic to decorative (Arial, Impact, Aladin, Pacifico, Lobster, Orbitron, Bebas Neue, Dancing Script and many more)
• Font style (Regular, Bold, Italic, Bold Italic)
• Text size and relief height
• Base border thickness and height
• An optional halo around the text for better contrast
• Ring size, hole diameter, and its position
• Colors of the base, halo, and text

Print settings:

• No supports needed
• Compatible with PLA, PETG or any rigid filament
• AMS/MMU recommended for the two-color effect — but prints very well in single color
• Layer height: 0.2mm recommended

Tips:

• Decorative fonts (Pacifico, Lobster, Aladin…) work best with the Regular style — they are already bold by design
• Increase the border value for long names to maintain balanced proportions
• The ring position uses relative coordinates: 0 = contact with the left edge, positive values weld it into the body of the part

-------------- EN --------------

Fully Customizable Name Keychain — AMS Multicolor

Print a personalized keychain for anyone in minutes. Type a name, pick a font, adjust the size — done. Designed for AMS/dual-extrusion printers to get a clean two-color result straight off the build plate, no painting or post-processing.

What you can customize:

• Text (name, word, anything)
• Font — 50+ choices from classic to decorative (Arial, Impact, Aladin, Pacifico, Lobster, Orbitron, Bebas Neue, Dancing Script and more)
• Font style (Regular, Bold, Italic, Bold Italic)
• Text size and relief height
• Base border thickness and height
• Optional halo outline around the text for better contrast
• Ring size, hole diameter, and position
• Colors for base, halo, and text

Print settings:

• No supports needed
• Works in PLA, PETG, or any rigid filament
• AMS/MMU recommended for the two-color effect — but prints fine in single color too
• Layer height: 0.2mm recommended

Tips:

• Decorative fonts (Pacifico, Lobster, Aladin…) work best with style set to Regular — they are already bold by design
• Increase the border value for longer names to keep proportions balanced
• The ring position uses relative coordinates: 0 = touching the left edge, positive values weld it into the body of the part