Dovetailed Adaptor for Leitz Microscope Condensor
Print Profile(1)
Description
Description
This is a Dovetailed Adaptor designed for attaching leeve mount condensers to dovetailed holder.
Allows you to mount modern condensers to vintage Leitz microscope stands.
In the spirit of open-source hardware, I am providing the master STEP file alongside the standard STL. Community can freely modify, remix, or integrate this geometry to fit with each one's microscope.
1. Technical Specifications
- Major Diameter: 59mm
- Inner Clearance: 39.5mm / 42.5mm
- Mounting Width: 46.5mm
- Dovetail Profile: offset 1.5 mm from each egde. Total 3mm for both side.
2. Files Included
.step (Master File): Recommended for those using CAD (Fusion 360, SolidWorks, etc.) who wish to adjust dimensions or tolerances.
.stl (Print-Ready): High-resolution mesh for direct slicing.
.pdf (Technical Drawing): A full dimensioned reference sheet.
License: Open Source (MIT / CC0)
This project is fully open-source. You are free to:
- Print it for personal or professional use.
- Modify the design and re-upload your versions.
- Distribute or sell physical prints.
License
Comment & Rating (0)