MambaQuad 7/8 inch Drone Frame
Print Profile(1)
Description
This drone frame was designed for my MambaQuad Drone Project, referencing many long-range FPV drone frames for its design. It is suitable for 28xx series motors and 7/8 inch propellers. The battery and flight stack are placed on the same level.
The STEP files of the parts have been uploaded for easy modification. If you need SLDPRT/SLDASM files, you can visit this GitHub project.
Feel free to follow this project!! 👉 MambaQuad Drone Project 👈
The main structure needs to be printed with a rigid material. PA6-GF/CF is a better choice, but I'm poor (just kidding), so I chose PLA-CF.
Due to high temperature considerations, the motor mounts have separate spacer parts, which need to be printed separately with high-temperature resistant material. I chose ASA.
The required hardware parts are as follows:
| Type | Specifics | Quantity |
| Nuts | M4 Nylon lock nuts | 14 |
| M3*4(height) Heat set inserts | 8 | |
| M3*5 Heat set inserts | 14 | |
| M4*4 Heat set inserts | 6 | |
| M2*5 Heat set inserts | 8 | |
| Screws | M2*8 Socket head cap screws | 8 |
| M3*10 Socket head cap screws | 4 | |
| M4*20 Chamfered flat head screws | 20 | |
| M4*8 45° Countersunk screws | 18 | |
| Standoffs | M4*60 | 12 |
| Washers | M4*7 Nylon washers | 6 |
License
Comment & Rating (0)