7- hedgehogtea light candle holder, decorative

                                            DO NOT USE REAL CANDLES

VERSION 7 CANDLE HOLDER 

The series of candle holders continues (to find other versions, visit my profile)

After the owl, the fox, the squirrel, the penguin, the raccoon, and the bear, I propose this version in the shape of a sleeping hedgehog, which conveys a sense of calm 

• Design: A stylized hedgehog that seems to "embrace" the candle, often described as Nordic or minimalist in style

• Usage: The circular opening on the belly allows a candle to be inserted, creating a soft light effect that illuminates the figure from within. Ideal as a centerpiece, shelf decoration, or soft night light. This type of object is often used as a decorative element or as a party favor for special events. Thanks to its minimalist design and matte finish, it fits well in modern environments and creates a warm atmosphere when the candle is lit

These objects are designed to hold a small LED Flame Tea Light Candle from Bambulab or similar (D37.2x36.6mm) which illuminates the central cavity, creating a warm and inviting atmosphere 

Colors and dimensions can be changed in the slicer at the time of printing. Supports detach very easily

I used Bambulab jade white filament 

A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then dry it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. These small precautions, along with many others, determine the success of a good print

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to encounter problems, do not hesitate to contact me; together we will look for solutions in a perfect collaborative environment. I have made several prints of this object and they all came out perfect as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, or damp or poor quality filaments, do not blame me

Happy printing everyone

PRINTING INSTRUCTIONS:

• Layer height 0.2 mm

• Initial layer height 0.2 mm

• Wall loops 2

• Top shell layers 5

• Bottom shell layers 3

• Infill 10%

• Grid pattern

• Supports Yes

• Outer wall speed 200 mm/s

• Inner wall speed 300 mm/s

• Normal print acceleration 8000 mm/s

• Outer wall acceleration 8000 mm/s