Two styles: Pikachu, multi-plate dual color/single color simplified version (no supports, no hardware required)
Print Profile(4)
Description
Boost Me (for free)
Your likes and boosts are my motivation to update!!! Thank you~
These are two **double-style pickup trucks!!** They feature **no hardware, and the axles** use a 3rd generation optimized printed spring design. One is a two-color version with many parts to assemble, requiring some force to install, suitable for players who enjoy assembly and multi-color models!! The other style is a simplified single-color version, with only the tailgate and wheels needing installation!! (Small size dimensions approx: 81.9*45.6*33.3mm)
Notes:
1. For the small size, some parts are relatively small, especially for the two-color small size, installation will be more difficult. Direct hand pressing is not recommended; use a hard object to push them in!!
2. If there isfirst layer elephant's foot/over-extrusion, it will affect installation difficulty. If present, please sand or scrape it off yourself!!
3. It seems that it currentlydoes not support printing multiple colors piece by piece on one plate for other printers anymore. For example, print profiles set forA1 can only be printed byA1; other printers cannot print this profile!! Therefore, subsequent multi-color configurations will be uploaded as separate plates for printing..!!
4. Subsequent works will no longer have the source files uploaded after application (the website no longer supports blend format..)!!
The GIF below is thewheelassembly diagram:
Tilt the wheel and place it onto one side of the axle clip, then press with your thumb on thered circle, and apply force with your index finger on theside of the wheel to push it in (using the lever principle). The installation method for the wheel on the other side is the same!!
The GIF below is thebodyassembly diagram:Small partsrequire some force to install!!Small partsrequire some force to install!!
1. First install the windshield and 4 car door black parts!!
2. Install other parts!!Small partsrequire some force to install; direct hand pressing is not recommended; use a hard object to push them in!!
3. The installation method for the simplified version's tailgate is the same as the two-color version in this diagram!!
4. If there is first layer elephant's foot/over-extrusion, it will affect installation difficulty. If present, please sand or scrape it off yourself!!
Note: 1. Both PLA and PETG can be printed. It's best to understand the characteristics of these two materials before printing to avoid printing failures!! For example, PLA can become brittle if left for a long time or at low temperatures, while PETG has good toughness. Please choose the filament that suits you!!
2. If it's for younger children, and the parts are small and easy to disassemble, it's better to glue them firmly with 502 or other adhesives to prevent them from being swallowed!!
3. If there are no special requirements, please do not use your own advanced process settings for printing~ to avoid printing failures!!
If your printd part has local spaghetti, or the filament doesn't stick to the build plate, please recall if you touched that area (hands secrete sweat and oil, touching it has a very high chance of causing spaghetti) or if the build plate is dirty. The solution is to search online for how to clean a 3D print plate!! If other problems occur, please describe it in the comments section and add pictures, so it's easier for us to solve it~ Otherwise, I can't imagine the situation = =!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)