Search models, users, collections, and posts

Lilypot [Spiral Vase mode]

sid naique
Household>Decor
IP Report

Print Profile(9)

All
P1S
H2S
H2C
H2D Pro
X1 Carbon
A1
X1E
X1
H2D
P2S
P1P
X2D
A2L
A1 mini
0.12mm layer, 1 walls, 0% infill
0.12mm layer, 1 walls, 0% infill
Designer
5.8 h
1 plate
4.8(277)
80% model, 0.6mm nozzle, 0.3mm layer, 1 walls, 0% infill
80% model, 0.6mm nozzle, 0.3mm layer, 1 walls, 0% infill
2.1 h
1 plate
4.9(34)
0.2mm layer, 1 walls, 0% infill, 3 bottoms Rainbow Silk PLA
0.2mm layer, 1 walls, 0% infill, 3 bottoms Rainbow Silk PLA
4.3 h
1 plate
4.7(76)
0.2mm layer, 1 walls, 0% infill
0.2mm layer, 1 walls, 0% infill
3.8 h
1 plate
4.8(26)
Click to see more
Open in Bambu Studio
Boost
1824
4196
613
273
5.9 k
3.2 k
Released 

Description

Lilypot Vase - to be printed using ‘Spiral Vase’ mode.

lilypot
spiral vase mode
vase mode
sidewalk

Comment & Rating (613)

(0/1000)
@CheeseBerry
Print Profile
0.12mm layer, 1 walls, 0% infill
gorgeous design, made a small one to check. if i can get it big enough i will try to use it as a lampshade. also one of strongest feeling vases i made in vase mode! love it. love it even more now !!! so happy with my new light, looks awesome!
(Edited)
21
Reply
@user_3069417280
It looks amazing! Congratulations
(Edited)
Show original
1
Reply
@Fvcksimile
Print Profile
0.2mm layer, 1 walls, 0% infill, 3 bottoms Rainbow Silk PLA
super cute but the bottom layer with holes… 🤦🏻‍♂️🤦🏻‍♂️
13
Reply
@24pixels
Boosted
what filament did you use?
0
Reply
@Bartek_Pe
Boosted
Hi, please share the filament brand??
0
Reply
@Bartek_Pe
Boosted
Amolean? black red gold silk pla
(Edited)
0
Reply
@UROB3D
I have this problem
4
Reply
@moowsje
i have this too, how do we fix it?
0
Reply
@FrankH
Boosted
Same problem, tested with a lot of different speed settings, temp settings, etc..... but could not get these mistakes to go away?!?
0
Reply
@moowsje
yes i tried everything its driving me crazy
0
Reply
@lmp1982
Print Profile
0.2mm layer, 1 walls, 0% infill, 3 bottoms Rainbow Silk PLA
nice print
8
Reply
@richardvdvelde
what filaments did you used? looks nice!
(Edited)
1
Reply
@lmp1982
Replying to @richardvdvelde :
it was a tri colour pla, ages ago now so not exactly sure
0
Reply
@user_3815193184
hello, what filaments are these
Show original
0
Reply
@AndreoBTW
Boosted
Print Profile
0.12mm layer, 1 walls, 0% infill
AMAZING!!!!
6
Reply
@love.harmony.li
Beautiful! Looks very high-end and expensive.😍
(Edited)
1
Reply
@Anarkia
Beautiful! What is the filament? Thank you
(Edited)
Show original
1
Reply
@AndreoBTW
Boosted
Replying to @Anarkia :
Eryone Dual color :)
(Edited)
1
Reply
@Sherryth54
Print Profile
0.2mm layer, 1 walls, 0% infill, 3 bottoms Rainbow Silk PLA
Strength Issue:It truly is a unique and beautiful vase, but it is super thin and tears very easily. I an Goin to see if there is a way to make it thicker for strength. Right now only fake flowers for this one.
8
Reply
@SrednamRetep
should be a bit thicker, at least bottom and top
(Edited)
1
Reply
@Xanderr97
Print Profile
0.12mm layer, 1 walls, 0% infill
I changed the vase mode to 3 layers, 1 layer is very thin and makes it easy to break.
2
Reply
@user_2995181710
When I use "vase mode" I cannot change the wall thickness without my slicer automatically turning off vase mode. How can I still adjust the wall thickness I am working in Prusa Slicer I hope you can help me because otherwise the vase is very thin and fragile
(Edited)
Show original
1
Reply
@Xanderr97
Replying to @user_2995181710 :
Hey! I just set all ‘vase mode’ settings manually. I work in Bambu, set vase mode, change the amount of layers. it gives me the error too. set vase mode on and check what settings have changed, then replicate these settings and add 2 more layers and you’re done. if anyone knows a better way please let me know!
0
Reply
@Xanderr97
Replying to @user_2995181710 :
Correct! Vase mode adjusts some settings, if you set these manually instead of choosing the vase mode option, you can have more walls. For example, turn on vase mode and see which settings are adjusted, write all of them down and then manually adjust all these settings (with the exception of the walls) Then you will have a super strong vase that really cannot be broken, you can neatly run the seam between the leaves so that you don't see it
Show original
0
Reply
@EesaCreates09
Print Profile
0.12mm layer, 1 walls, 0% infill
An elegant detailed vase that looks amazing and looks beautiful in any place of your home. It was easy to 3D print and I really like this Vase!
4
Reply
@alorlov
Print Profile
0.2mm layer, 1 walls, 0% infill, 3 bottoms Rainbow Silk PLA
profile
5
Reply
@user_4236612055
How did u got it so smooth and almost seamless? i got alot of visible lines with my dual color
0
Reply
@JasonRicardo
Print Profile
0.2mm layer, 1 walls, 0% infill, 3 bottoms Rainbow Silk PLA
amazing! made the walls ticker and its good to go
1
Reply
@user_4236612055
looks so smooth! can u share your settings? my print with dual color has alot of weird lines etc
(Edited)
2
Reply
@SDPrintingLab3D
Boosted
Replying to @user_4236612055 :
Mine also has the same lines (P1S) @JasonRicardo could you tell us how you managed to make the print glossy without weird lines
Show original
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Spiral Vase
Spiral Vase
MoritzA
16 k
2.6 k
Spiral Vase
Spiral Vase
MaXiLuPa
37.7 k
6 k
Vase - Spiral Vase Mode
Vase - Spiral Vase Mode
KobaRiley
2.3 k
408
Unsinkable Boat - Spiral Vase Mode
Unsinkable Boat - Spiral Vase Mode
BamBam Design
7.9 k
1.7 k