LayerForge

cover

IMG_20260426_071007.jpg

IMG_20260426_070940.jpg

IMG_20260426_070952.jpg

plate_1.png

227d516687e3d4d0.png

<p><strong>SUNLU PLA Matte – 0.16mm High Quality – Bambu Lab A1</strong></p><h4> </h4><h4>Stampanti compatibili</h4><p>Bambu Lab A1 (testato)</p><p>&nbsp;</p><h4>Materiale testato nel profilo</h4><p>SUNLU PLA Matte – montato su BiQu CryoGrip.</p><p>&nbsp;</p><h4>Conferma test di stampa</h4><p>Modello stampato con successo con questo profilo. Le foto pubblicate mostrano il risultato reale ottenuto con le impostazioni indicate.</p><p>&nbsp;</p><h4>Descrizione del profilo di stampa</h4><p>Il profilo utilizza un layer height di 0.16mm in modalità High Quality per preservare la resa dei dettagli organici del modello: capigliatura, muscolatura e texture dei vestiti beneficiano di questa risoluzione rispetto al layer standard da 0.20mm.</p><p>L&#39;oggetto viene posizionato sul piatto con orientamento inclinato per ridurre le superfici critiche in overhang e concentrare i supporti nelle zone inferiori, migliorando la qualità delle aree esposte. I supporti Albero Ibrido con angolo soglia a 25° garantiscono una copertura adeguata mantenendo la rimozione agevole.</p><p>L&#39;infill al 10% con trama Gyroid è sufficiente per un modello puramente decorativo di questa dimensione. Le pareti a 2 loop bilanciano resistenza e tempo di stampa; i 6 layer superiori assicurano una chiusura pulita delle superfici a vista.</p><p>La velocità della parete esterna è impostata a 150mm/s, con rallentamento progressivo sulle sporgenze fino a 10mm/s per gli overhang al 75–100%, parametro determinante per la qualità del viso e delle mani.</p><p>&nbsp;</p><figure class="table"><table><thead><tr><th>Impostazione</th><th>Valore</th></tr></thead><tbody><tr><td>Layer height</td><td>0.16 mm</td></tr><tr><td>Pareti</td><td>2 loop</td></tr><tr><td>Layer superiori / inferiori</td><td>6 / 4</td></tr><tr><td>Infill</td><td>10% – Gyroid</td></tr><tr><td>Supporti</td><td>Albero Ibrido – solo dal piatto – soglia 25°</td></tr><tr><td>Velocità parete esterna</td><td>150 mm/s</td></tr><tr><td>Velocità sporgenze (100%)</td><td>10 mm/s</td></tr><tr><td>Velocità supporto</td><td>150 mm/s</td></tr><tr><td>Materiale</td><td>SUNLU PLA Matte</td></tr><tr><td>Piatto</td><td>BiQu CryoGrip</td></tr></tbody></table></figure>

<p><strong>SUNLU PLA Matte – 0.16mm High Quality – Bambu Lab A1</strong></p><h4> </h4><h4>Compatible printers</h4><p>Bambu Lab A1 (tested)</p><p>&nbsp;</p><h4>Material tested in profile</h4><p>SUNLU PLA Matte – mounted on BiQu CryoGrip.</p><p>&nbsp;</p><h4>Print test confirmation</h4><p>Model successfully printed with this profile. The published photos show the actual result obtained with the indicated settings.</p><p>&nbsp;</p><h4>Print profile description</h4><p>The profile uses a 0.16mm layer height in High Quality mode to preserve the rendition of the model's organic details: hair, musculature, and clothing textures benefit from this resolution compared to the standard 0.20mm layer.</p><p>The object is positioned on the build plate with a tilted orientation to reduce critical overhang surfaces and concentrate supports in lower areas, improving the quality of exposed areas. Hybrid Tree supports with a 25° threshold angle ensure adequate coverage while maintaining easy removal.</p><p>A 10% infill with a Gyroid pattern is sufficient for a purely decorative model of this size. The 2 wall loops balance strength and print time; the 6 top layers ensure a clean closure of visible surfaces.</p><p>The outer wall speed is set to 150mm/s, with progressive slowing on overhangs down to 10mm/s for 75–100% overhangs, a crucial parameter for face and hand quality.</p><p>&nbsp;</p><figure class="table"><table><thead><tr><th>Setting</th><th>Value</th></tr></thead><tbody><tr><td>Layer height</td><td>0.16 mm</td></tr><tr><td>Walls</td><td>2 loops</td></tr><tr><td>Top / bottom layers</td><td>6 / 4</td></tr><tr><td>Infill</td><td>10% – Gyroid</td></tr><tr><td>Supports</td><td>Hybrid Tree – from build plate only – threshold 25°</td></tr><tr><td>Outer wall speed</td><td>150 mm/s</td></tr><tr><td>Overhang speed (100%)</td><td>10 mm/s</td></tr><tr><td>Support speed</td><td>150 mm/s</td></tr><tr><td>Material</td><td>SUNLU PLA Matte</td></tr><tr><td>Build plate</td><td>BiQu CryoGrip</td></tr></tbody></table></figure>

0.16mm layer, 2 walls, 10% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>Se sei un fan della Terra di Mezzo, sai bene che Beorn non è un personaggio qualunque. </p><p>🐻 Guerriero solitario, mutaforma temuto, guardiano delle terre selvagge, uno dei personaggi più iconici e meno celebrati de <i>Lo Hobbit</i>. Questa figura da 132mm lo rende finalmente giustizia: imponente, dettagliato, pronto per la scrivania o la vetrina.</p><p>&nbsp;</p><h4>🖨️ Compatibilità</h4><ul><li><strong>Stampanti testate:</strong> Bambu Lab A1</li><li><strong>Compatibile con:</strong> tutta la lineup Bambu Lab e stampanti FDM con volume minimo 130×130×130mm</li><li><strong>Ugello testato:</strong> 0.4mm</li><li><strong>Filamento testato:</strong> SUNLU PLA Matte</li><li><strong>Orientamento:</strong> inclinato sul piatto per ottimizzare i supporti e la qualità superficiale</li></ul><h4>📐 Specifiche Tecniche</h4><figure class="table"><table><thead><tr><th>Parametro</th><th>Valore</th></tr></thead><tbody><tr><td>Altezza figura (verticale)</td><td>~132 mm</td></tr><tr><td>Dimensioni stampa (inclinata)</td><td>73,6 × 122,1 × 122,5 mm</td></tr><tr><td>Materiale testato</td><td>SUNLU PLA Matte</td></tr><tr><td>Layer height</td><td>0.16 mm</td></tr><tr><td>Infill</td><td>10% – Gyroid</td></tr><tr><td>Loop pareti</td><td>2</td></tr><tr><td>Layer superiori / inferiori</td><td>6 / 4</td></tr><tr><td>Supporti</td><td>Sì – Albero Ibrido, solo dal piatto</td></tr><tr><td>Angolo soglia supporti</td><td>25°</td></tr><tr><td>Peso totale (con supporti)</td><td>~50,56 g</td></tr><tr><td>Tempo di stampa stimato</td><td>~5h 34m</td></tr><tr><td>File</td><td>1 STL/3MF unico</td></tr><tr><td>Varianti</td><td>1</td></tr></tbody></table></figure><h4>💡 Consigli di Stampa</h4><ul><li><strong>Non modificare l&#39;orientamento</strong> preimpostato nel 3MF: è stato ottimizzato per minimizzare i supporti sulle zone critiche.</li><li>L&#39;infill al <strong>10% con Gyroid</strong> è sufficiente: la figura è decorativa e non subisce carichi meccanici.</li><li>I supporti sono facilmente removibili</li></ul><p>&nbsp;</p><boostme><boosttitle>Boost Me</boosttitle><boostcontent>Se Beorn ha trovato posto sulla tua scrivania, lascia un like e fai un boost, aiuta la serie a crescere e mi permette di continuare a pubblicare nuovi personaggi della Terra di Mezzo. 🧙</boostcontent></boostme>

<p>If you are a fan of Middle-earth, you know well that Beorn is not just any character. </p><p>🐻 A solitary warrior, a feared skin-changer, guardian of the wild lands, one of the most iconic and least celebrated characters in <i>The Hobbit</i>. This 132mm figure finally does him justice: imposing, detailed, ready for your desk or display case.</p><p>&nbsp;</p><h4>🖨️ Compatibility</h4><ul><li><strong>Printers tested:</strong> Bambu Lab A1</li><li><strong>Compatible with:</strong> the entire Bambu Lab lineup and FDM printers with a minimum volume of 130×130×130mm</li><li><strong>Nozzle tested:</strong> 0.4mm</li><li><strong>Filament tested:</strong> SUNLU PLA Matte</li><li><strong>Orientation:</strong> tilted on the build plate to optimize supports and surface quality</li></ul><h4>📐 Technical Specifications</h4><figure class="table"><table><thead><tr><th>Parameter</th><th>Value</th></tr></thead><tbody><tr><td>Figure height (vertical)</td><td>~132 mm</td></tr><tr><td>Print dimensions (tilted)</td><td>73.6 × 122.1 × 122.5 mm</td></tr><tr><td>Tested material</td><td>SUNLU PLA Matte</td></tr><tr><td>Layer height</td><td>0.16 mm</td></tr><tr><td>Infill</td><td>10% – Gyroid</td></tr><tr><td>Wall loops</td><td>2</td></tr><tr><td>Top / bottom layers</td><td>6 / 4</td></tr><tr><td>Supports</td><td>Yes – Hybrid Tree, from build plate only</td></tr><tr><td>Support threshold angle</td><td>25°</td></tr><tr><td>Total weight (with supports)</td><td>~50.56 g</td></tr><tr><td>Estimated print time</td><td>~5h 34m</td></tr><tr><td>File</td><td>1 unique STL/3MF</td></tr><tr><td>Variants</td><td>1</td></tr></tbody></table></figure><h4>💡 Printing Tips</h4><ul><li><strong>Do not change the preset orientation</strong> in the 3MF: it has been optimized to minimize supports in critical areas.</li><li>A <strong>10% infill with Gyroid</strong> is sufficient: the figure is decorative and does not undergo mechanical loads.</li><li>Supports are easily removable</li></ul><p>&nbsp;</p><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If Beorn has found a place on your desk, leave a like and give a boost, it helps the series grow and allows me to continue publishing new Middle-earth characters. 🧙</boostcontent></boostme>

Print Profile(1)

Description

🖨️ Compatibility

📐 Technical Specifications

💡 Printing Tips

Comment & Rating (2)

License

Related Models

Beorn – The Hobbit