Search models, users, collections, and posts
Compact 1:100 Gearbox Stepper Motor NEMA 17
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
1.6 h
1 plate
Open in Bambu Studio
Boost
26
53
1
0
44
11
Released
Bill of Materials
List other parts
- M3x6 Countersunk Screws x 4:
- M3x8 SocketCap Screws x 4:
- Bearing 30x42x7 x 1:
- Bearing 8x12x3.5 x 2:
Description
Fully 3D-printable 100:1 cycloidal speed reducer that bolts directly onto a NEMA 17 stepper. Compact two-stage compound design fits within the 42 × 42 mm motor footprint.
Assembly Instructions:
- Bolt the enclosure to the stepper
- press fit the bearings into the cycloids
- press fit cycloids onto the shaft, placing the 11lobe cycloid on the shorter end of the shaft.
- press the shaft onto the stepper shaft noting the d shape of the shaft
- press the 2nd stage ring into its bearing
- press fit the bearing and 2nd stage ring into the enclosure
- screw the faceplate onto the enclosure
Bill of Materials:
- 2 x 8x12x3.5 Ball bearings
- 1 x 30x42x7 Ball Bearing
- 4 x M3x8 SocketCap Screws
- 4 x M3x6 Countersunk Screws
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)