Axis Gear Works

cover

CaptainAmericaMinion Hero.png

Captain America Minion.png

DeadPoolMinionBodyShot (2).png

image9.jpeg

plate_1.png

d22bb04abedd99db.png

<h2>PLA Profile</h2><figure class="table"><table><thead><tr><th>Setting</th><th>Value</th></tr></thead><tbody><tr><td>Nozzle</td><td>0.4mm</td></tr><tr><td>Layer height</td><td>0.2mm</td></tr><tr><td>Walls</td><td>2–3</td></tr><tr><td>Infill</td><td>15%</td></tr><tr><td>Supports</td><td>Tree (Slim), on build plate</td></tr></tbody></table></figure><blockquote><p>💡 The showcase figure was printed in <strong>PETG body with PLA support interface</strong> — clean release, crisp face and shield details, and improved durability for display handling.</p></blockquote><h2>💡 Tips &amp; Tricks</h2><ul><li><strong>AMS / CFS users:</strong> the 3MF is pre-mapped for multi-color — just load your filaments in your slicer and go. Color choices are fully in your hands.</li><li><strong>Single-color printers:</strong> print the whole figure in <strong>single color</strong> as a paint-friendly base, then hand-paint for a showroom finish.</li><li><strong>Shield arm:</strong> keep tree supports enabled on the raised shield arm — it&#39;s the showpiece and the most overhang-sensitive feature.</li><li><strong>Seam placement:</strong> rotate the seam to the back before slicing for the cleanest front-facing details on the chest star and belt.</li><li><strong>Display pairing:</strong> looks best shoulder-to-shoulder with the rest of the Mashup Mayhem squad for a full comic-cover shelf.</li></ul>

PLA w/PLA supports 0.2mm layer, 2 walls, 15% infill

<h2>PETG Profile <i>(showcase print)</i></h2><figure class="table"><table><thead><tr><th>Setting</th><th>Value</th></tr></thead><tbody><tr><td>Nozzle</td><td>0.4mm</td></tr><tr><td>Layer height</td><td>0.2mm</td></tr><tr><td>Walls</td><td>2–3</td></tr><tr><td>Infill</td><td>15%</td></tr><tr><td>Supports</td><td>Tree (Slim) </td></tr><tr><td>Support interface material</td><td>PLA</td></tr><tr><td>Support interface top Z distance</td><td>0mm</td></tr></tbody></table></figure><blockquote><p>💡 The showcase figure was printed in <strong>PETG body with PLA support interface</strong> — clean release, crisp face and shield details, and improved durability for display handling.</p></blockquote><h2>💡 Tips &amp; Tricks</h2><ul><li><strong>AMS  users:</strong> the 3MF is pre-mapped for multi-color — just load your filaments in your slicer and go. Color choices are fully in your hands.</li><li><strong>Single-color printers:</strong> print the whole figure in <strong>Single color </strong>as a paint-friendly base, then hand-paint for a showroom finish.</li><li><strong>Shield arm:</strong> keep tree supports enabled on the raised shield arm — it&#39;s the showpiece and the most overhang-sensitive feature.</li><li><strong>Seam placement:</strong> rotate the seam to the back before slicing for the cleanest front-facing details on the chest star and belt.</li><li><strong>Display pairing:</strong> looks best shoulder-to-shoulder with the rest of the Mashup Mayhem squad for a full comic-cover shelf.</li></ul>

PETG w/PLA support interface 0.2mm layer, 2 walls, 8% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>&#34;I can do this all day&#34; — one layer at a time. Shield up, goggles down, the star-spangled Minion reports for duty, ready to defend banana supplies and freedom alike. This single-body 100mm Avenger drops straight into your AMS/CFS and comes off the plate assembled and standing — no gluing, no post-work, just print and salute.</p><h2>✨ Features</h2><ul><li><strong>Single-body print</strong> — no assembly, no glue, just print and display</li><li><strong>3MF file</strong> pre-configured for AMS multi-color</li><li><strong>Two printer profiles</strong> included: PLA and PETG (showcase print)</li><li><strong>Standing pose</strong> with shield raised proud at the side</li><li><strong>100mm display scale</strong> — perfect for the shelf, desk, or collection lineup</li><li><strong>Paint-friendly geometry</strong> for single-color printers</li><li>Part of the expanding AGW <strong>Mashup Mayhem</strong> roster</li></ul>

Print Profile(2)

Description

✨ Features

Comment & Rating (0)

License