1/2" Female Hose Barb Set Ø6–24 mm
Print Profile(11)
Description
🔧 Description
The project was prepared with multi-profile + separate single models for each diameter (the indicated measurement refers to the internal diameter of the tube to be connected), so you can:
- print all fittings in a single print
- print only what you need
- avoid manual modifications to the plate
- quickly choose the most suitable diameter for your tube
Set consisting of 3D printable 1/2'' female hose barb fittings, designed to connect tubes of different diameters with good compatibility with standard fittings
The package includes the following measurements referring to the internal diameters of the tube to be connected:
Ø6 mm
Ø8 mm
Ø10 mm
Ø12 mm
Ø14 mm
Ø16 mm
Ø18 mm
Ø20 mm
Ø22 mm
Ø24 mm
Ideal for:
- water or air hose connections
- irrigation systems
- workshop and DIY
- tests and prototypes
- quick adaptations to existing systems
✔ Thread compatible with hydraulic standard GAS/BSP 1/2'' female
✔ Complete set with tube diameters from Ø6 to Ø24 mm
✔ Multiple files for single or complete printing
✔ Geometry optimized for FDM printing
✔ Simple, compact, and robust structure
✔ Useful for quick connections, tests, and adaptations
The tube insertion area is designed with spaced hose barb profiles (barbs), designed to:
✔ improve grip on the tube
✔ reduce the risk of slipping under pressure
✔ allow correct tightening of the clamp, which can work between the teeth without deforming the fitting
This geometry ensures a more stable and secure fastening, even with soft tubes
⚠️ Printing Notes
To improve bed adhesion I added small supports to the base of the model
✔ They are needed because the contact surface is reduced
✔ If the plate is not perfectly clean, the part might detach
👉 The supports are not structural, so you can remove them or deactivate them if you have good adhesion (clean bed, glue, PEI, etc)
⚠️ Warning
Not suitable for high pressure, hot water, or critical systems
To improve sealing, the use of PTFE tape (Teflon) is recommended when necessary
📐 TECHNICAL SPECIFICATIONS
Type: hydraulic female hose barb fittings
Thread standard: GAS / BSP
Thread: 1/2'' female
Internal diameters of the tube to be connected: Ø6 – Ø24 mm (2 mm step)
Configuration: multi-profile + single models
Recommended technology: FDM printing
Recommended materials: PLA / PETG / ASA / ABS
🔧 Other versions available:
👉 1/2" Male Set Ø6–24 mm
https://makerworld.com/it/models/2687519-hydraulic-fittings-1-2-m-hoses-o-inner-6-24-mm#profileId-2977271
👉 3/4" Male Set Ø6–28 mm
👉 3/4" Female Set Ø6–28 mm
https://makerworld.com/it/models/2747643-hydraulic-fittings-3-4-m-internal-tube-o-6-28-mm#profileId-30479
🧾 Note
As with other models in my collection, these fittings have also been tested with commercial components and designed to be practical, printable, and useful in technical, hobby, and workshop settings
Boost Me (for free)
Se ti piacciono i miei modelli, sostieni il mio impegno con un boost
Membership
Support FabiuzWorks • Commercial License available for selling physical prints • Membership tiers available for supporters and priority design requests • Custom fitting, adapter, cap and plug requests are always welcome Check out my membership tiers for details.
Vuoi offrirmi un caffè? Puoi farlo qua
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)