P2S High-Power Chamber Temperature Module

x2d is the real p2s😡

Since the release of x2d was quite frustrating for me, I decided to install a chamber temperature module on my p2s, making it a half x2d (lol)

However, I bought things too quickly and only started looking for solutions on MW after the purchase. It turned out that mainstream solutions use 97 fans and PTCs below 300W. Sticking to the principle of not wasting, I had to design it myself.

Features:

1. 120 fan + 500W PTC

2. Fixed with a bayonet mount and magnets + a dedicated bottom wire outlet, making installation and removal as simple as placing and taking off

Problem: The slide rail for the cover plate was made too small, causing the cover plate to be very unstable due to the deformation of the main body, and it can even be pried off directly!

I'm too tired to change it. I personally just removed the cover plate and used it without. I'm uploading it here as a reference; if anyone needs it, they can check the dimensions or print it. Everything works well except for the cover plate. I won't write descriptions of materials for now; if you need them, you can ask me later. After all, probably no one will buy a p2s machine anymore, haha🤡