veli

AGR68

cover

Molle_10.jpeg

Molle_20.jpeg

Molle_21.jpeg

Molle_22.jpeg

Molle_30.jpeg

Molle_31.jpeg

Molle_40.jpeg

Molle_41.jpeg

Molle_42.jpeg

Molle_3.png

Molle_2.png

Molle_1.png

Molle

plate_1.png

Molle auf 20mm

plate_2.png

Molle Wanderstöcke

plate_3.png

Molle_1.jpeg

Molle_1_(1).png

Schichthöhe 0,2mm6 Wandlinien25% Füllung mit Stützen&nbsp;

0.2mm layer height6 walls25% infillwith supports

0,2mm layer, 6 walls, 25% infill

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

Das sind ein paar meiner Versionen für das Molle System.1. Das Einfache (Standard) 2. Das Doppelte (Habe ich für z.Bsb. eine Handytasche am Rucksackgurt gemacht. Damit muss ich nicht zwei &#34;Einfache&#34; anbringen) 3. Für Trekkingstöcke (mit 15mm Durchmesser, 4mm Gummiband) 4. Als Adapter für das 20mm Gurtsystem (wie z.Bsp. die Gürtelbefestigung). Dazu gibt es drei Varianten: 4.1 Komplett gedruckt, mit Stützen 4.2 Zwei Teile, mit Gewinde im Unterteil (Schraube M4x10, Gewinde muss wohl nachgeschnitten werden) 4.3 Zwei Teile. mit Muttern im Unterteil (Schraube M4x10, Mutter M4 Standard) Die beiden 20mm Gurte werden seitlich eingeschoben und sind damit fixiert. Dann kann das am Standard-Molle System angebracht werden.<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Booste mich, wenn Dir mein Design gefällt. Danke! Give me a thumbs up if you like my design. Thanks!</boostcontent></boostme> These are a few of my versions for the MOLLE system.1. The Single (Standard) 2. The Double (I made this for things like a cell phone pouch on a backpack strap. This way I don&#39;t have to attach two &#34;single&#34; ones) 3. For trekking poles (with a 15mm diameter, 4mm elastic) 4. As an adapter for the 20mm webbing system (like belt loops). There are three versions: 4.1 Fully 3D printed, with supports 4.2 Two parts, with a threaded base (M4x10 screw, threads will probably need to be re-tapped) 4.3 Two parts, with nuts in the base (M4x10 screw, standard M4 nut) The two 20mm straps are inserted from the side and are thus secured. Then it can be attached to the standard MOLLE system.

These are a few of my versions for the MOLLE system.1. The Single (Standard) 2. The Double (I made this for things like a cell phone pouch on a backpack strap. This way I don&#39;t have to attach two &#34;single&#34; ones) 3. For trekking poles (with a 15mm diameter, 4mm elastic) 4. As an adapter for the 20mm webbing system (like belt loops). There are three versions: 4.1 Fully printed, with supports 4.2 Two parts, with a threaded base (M4x10 screw, threads will probably need to be re-tapped) 4.3 Two parts, with nuts in the base (M4x10 screw, standard M4 nut) The two 20mm straps are inserted from the side and are thus secured. Then it can be attached to the standard MOLLE system.<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Boost me if you like my design. Thanks! Give me a thumbs up if you like my design. Thanks!</boostcontent></boostme> These are a few of my versions for the MOLLE system.1. The Single (Standard) 2. The Double (I made this for things like a cell phone pouch on a backpack strap. This way I don&#39;t have to attach two &#34;single&#34; ones) 3. For trekking poles (with a 15mm diameter, 4mm elastic) 4. As an adapter for the 20mm webbing system (like belt loops). There are three versions: 4.1 Fully 3D printed, with supports 4.2 Two parts, with a threaded base (M4x10 screw, threads will probably need to be re-tapped) 4.3 Two parts, with nuts in the base (M4x10 screw, standard M4 nut) The two 20mm straps are inserted from the side and are thus secured. Then it can be attached to the standard MOLLE system.

MOLLE Collection

ASIA

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models