Slav Troopers

Important note: This model can be printed directly in color using an AMS multi-material profile, but be aware that it consumes a significant amount of filament! To save material — or if you plan to paint the model — you can print it in a single color by removing the preset colors in the print profile.

⚠️ Warning: For H2D printers, using the purge tower is strongly recommended.

Slav Troopers – Tracksuit Unit

Squatting low, fully relaxed, ready to throw down — or just chill on the corner shooting the breeze. These two 3D-printed figures hijack imperial iconography and drop it straight into full-on streetwear territory: signature helmet bolted on, striped tracksuit fitted, sneakers laced up.

One in blood red, the other in highlighter yellow — an unlikely duo caught somewhere between the Tatooine cantina and a suburban parking lot. The cheeki breeki squat seals the deal: here, the Empire has traded the blaster for a cigarette and a soda.

This hybrid creation sits somewhere between collectible figure, internet meme, and urban art toy — at the crossroads of design, pop culture, and tongue-in-cheek humor.

🖨️ Print Settings

Bambu Lab H2D | Nozzle 0.4 mm | Textured PEI Plate

0.20mm Standard @BBL H2D

── Quality

• Layer height: 0.2 mm
• First layer: 0.2 mm
• Walls: 2
• Top / Bottom: 5 / 3 layers

── Infill

• Density: 15%
• Pattern: grid
• Top surface: monotonicline
• Bottom surface: monotonic

── Supports

• Type: tree(auto)
• Threshold: 30°
• Z distance: 0.2 mm

── Speeds (mm/s)

• Outer wall: 200
• Inner wall: 300
• Infill: 350
• Top surface: 200
• Travel: 1000
• First layer: 50

── Filament

• Type: PLA
• Brand: Bambu Lab
• Profile: Bambu PLA Matte
• Nozzle temp: 220°C
• Bed temp: 55°C

── Colors

• Bambu PLA Matte #FFFFFF · PLA
• Bambu PLA Matte #161616 · PLA
• Bambu PLA Matte #D3B7A7 · PLA
• Bambu PLA Matte #FFFF00 · PLA

── Misc

• Seam: aligned
• Z-hop: 0.4 mm
• Brim: auto_brim
• Prime tower: Yes — 60 mm
• Elephant foot: 0.15 mm

📦 Objects per Plate

── Plate 1 (1 object)

Urban Style V4.stl — Bambu PLA Matte · 6 overrides

• inner wall speed: 300,50,300,50,600 300
• internal solid infill pattern: zig-zag
• outer wall speed: 200,50,200,50,500 200
• Skeleton infill: 5% 15%
• Skin infill: 5% 15%
• Infill density: 5% 15%

Generated with 3MF Print Card — tool by SlevinEIGHT