Ender 3/ Pro / V2 / Neo Ultimate Bed Test
Print Profile(1)
Description
The Ultimate Ender 3 series Bed Test! This test ensures that:
- Your bed is leveled correctly
- Your adhesion is good, with no contamination
- Your first layer is perfect, or decent
This print takes around 90 minutes, but that's to be expected from Enders.
How to use:
After printing, see if there are:
- There are transparent areas
- There is an uneven “stringing” and poor adhesion
- There are random spots that don't stick to the build plate
Here is how to diagnose those problems:
- Tension the bed wheel more, so that the nozzle is farther away from the bed
- Give the wheel a bit more space, so that the nozzle is closer to the plate
- Clean the bed with dish soap or >90% Isopropyl Alcohol
Hope this helps!
All parts were designed by me in Onshape
Boost Me (for free)
If you find this print useful, please boost me. It helps a ton.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)