1/64 Small Scene: Yihe Road 01

[Nanjing Yihe Road] Series! Updates begin...

The Yihe Road No 1 scene features a straight road with an iconic gate

The tall trees in the courtyard and the old-fashioned postboxes by the road immediately transported me back to the countless places I passed going to and from school. This was my commute during middle school, cycling back and forth in this area for six years

In fact, such streetscapes in Nanjing are not limited to Yihe Road, but also include Ninghai Road, Langya Road, Putuo Road, Lingyin Road, Guling Road, Luojia Road... North of Beijing West Road's main artery, all the way to the large roundabout at Jiangsu Road's Pioneer Bookstore, you'll find similar scenery: quiet streets, ordinary residential areas, excellent primary schools, none of the bustle of shops, unlike the liveliness of Xuhui. Many immovable cultural relics, where one courtyard tells a piece of Republic of China history, give this area a unique profound atmosphere

————Back to business separator line————

[5.6 Update]

The stress grooves on the base bottom have been optimized, the outer brim is removed and replaced with corner brim, achieving a flatter bottom edge. Of course, a glue stick is even better

Still available are the [AMS Version] and [Non-AMS Version]

All use 0.4mm nozzles, but a 0.2mm [high-precision version] is also provided for detailed printing of small parts. You can choose freely

[Prevent Warping]

Warping Terminator Three-piece Set

1, Stress grooves

2, brim

3, Glue stick

This time, stress grooves have been added to the bottom, combined with brim and glue stick, to completely eliminate warping

[If you use different build plates and filament types when printing, be sure to change the settings before slicing and printing! Otherwise, it will lead to print failure]

[Small Breakthrough]

To better display the sidewalk tiles and tactile paving, while avoiding the hassle of a 0.2mm nozzle,

I repeatedly tested and adjusted the model, narrowing the gaps while also ensuring good performance from the 0.4mm nozzle,

Finally, I set the sidewalk separately, using a 0.12mm layer height, achieving a good balance

[About the Trees]

I spent a long time choosing; they needed to be large, dense, and not shed powder

The large ones are 13cm, the small ones 10cm

They can be directly inserted into the tree pits behind the wall's back door. The tree pits use negative parts, which can be modified in position and size, or deleted, as desired

I hope everyone has fun!

Yihe Road No 2 scene is under construction...

TO BE CONTINUE…