Cat tent frame for bed

This is a frame for an under blanket cat tent.

My cats get cold on winter, and we have a heated blanket, they like to get under the blanket, but not directly under, so usually is under my legs, so I designed and printed this for them. They immediately loved it and became a permanent thing during winter in my house.

To assembly it, you will need a wooden strip, I got a 2.5 metters long then cut it to:

• 50cm long x 1.
• 32cm long x 6.

About the measures of the wood strip, originally I got a 19.5mm x 15.1mm, but I have uploaded versions for 20mm x 20 mm and 18 x 22 mm. You can also now just modify as you want. You can change all this values directly from the web, or download the fusion 360 file.

The parametric will start to fail if the wood strip width and height goes beyond 23mm, I also recommend to use the bigger side as width.

If you can't get that exact same wooden strip, you can let me know, and I'll upload stls with the measuremetns you need.

I also used some m2.5 x 30mm screws and nuts, but it could holt it self with friction as well.

You will need a drill for the wood.